INSTALLATION Instructions
Basic Thermostat
Bypass Thermostat
Heavy Duty Weirstat
Offset Thermostat
Rubber Seal Thermostat
Thermostat with Installation Tool
LOCKING FUEL CAPS:
For Pre-Vent (Pressure Release) Locking Fuel Caps
- INSTRUCTIONS:
- To Install - Rotate cap to RIGHT until cap ratchets "clicks" on filler neck 3 times.
- To Remove - Insert key.
- Hold cap and rotate key left ¼ turn to start pressure release. After hissing stops, rotate cap left until fully removed. DO NOT USE KEY TO ROTATE CAP.
For Quick-on Locking Fuel Caps
- INSTRUCTIONS:
- To Install Cap: Rotate cap to Right until cap ratchets (clicks) on filler neck 3 times.
- To Remove Cap: Insert key. Hold cap and rotate key left ¼ turn until it stops. Then rotate cap left until fully removed.
- Do not use key to rotate cap.
- To Remove Key: Rotate key Right ¼ turn.
For Metal Push On Locking Fuel Caps
- INSTRUCTIONS:
- To Install - With the key removed, push cap into filler neck until both lock bars engage under the filler neck cams with an audible "click:. Do not turn cap.
- To Remove - Insert key. Rotate key slowly 1/4 turn to retract lock bars. Cap can now be removed from neck.